|
|
 |
SOURCE
PRODUCTION & EQUIPMENT CO., INC.
|
|
The SPEC-300 system is designed to maximize SAFETY, RELIABILITY,
DURABILITY, AND LOW MAINTENANCE to reduce liability and yield higher profits.
Rental unit & source available - contact
Sales Dept for more information.
DURABILITY
Constructed of stainless steel, the SPEC-300 withstands severe accidental
impacts and is highly corrosion-resistant.
SAFETY
The SPEC-300 has convenient holes located on the sides near the top
corners (4 total) providing a sturdy means to attach a security harness or
permanent installation mounts and will support 25 times the weight of the
device. Two pivoting lifting eyes are located on top of the device
for attaching lifting cables, harness or other lifting attachments and
will support 25 times the weight of the device.
The SPEC-300 uses the same safe & reliable ASM/Lock Module Assembly as
the SPEC-150. The ASM/Lock Module can be replaced without removing
the source from the device using the new transport locking system.
RELIABILITY
No moving parts are involved with the ASM design. The SPEC-300 system is
designed to significantly limit the ingress of dirt and foreign materials,
in all environments and working conditions, to protect against
malfunctions.
LOW MAINTENANCE
Absolutely no user disassembly for cleaning or maintenance is required.
The SPEC-300 is completely lubrication-free. Costly down-time due to
maintenance and returns to the manufacturer for repairs is virtually
eliminated.
OPTIONAL ANNUAL MAINTENANCE PROGRAM
The SPEC-300 maintenance program helps control costs and keep equipment at
peak performance. Dangerous equipment failures which may cause worker
injury and subject the employer to legal liability are minimized.
Specifications
| SHIELD Depleted Uranium 500 lbs. (227 kg) with durable titanium S-tube. |
CONSTRUCTION Fully welded stainless steel. |
| DIMENSIONS Length: 26" Width: 14" Height: 15" |
WEIGHT Approximately 780 lbs. |
| SOURCES SPEC Model G-70 source assembly |
RATED CAPACITY 300 curies Co-60 11,100 Gbq |
ASSOCIATED EQUIPMENT
The SPEC-300 is authorized for use with approved control assemblies,
flexible blue guide tubes, collimators,
and the remote unsecuring mechanisms (RUM) that are designed, tested,
manufactured and inspected by SPEC. The maximum standard guide tube length
is 21 feet. Existing control assemblies may be converted for use
with the SPEC-300. Replacement sources
and associated equipment manufactured by other companies may be submitted
for approval for use with the SPEC-300.
COMPLIANCE
The SPEC-300 System meets ANSI N432-1980 and U.S. Nuclear Regulatory
Commission 10 CFR Part 34.20 regulations. The Louisiana Radiation
Protection Division Registry No. is LA-0612-D112-S. U.S. DOT approval
Certificate of Compliance No. is USA/9282/B(U)-85. The G-70 source meets
ANSI N542 Classification 77C43515, U.S. DOT 10 CFR Part 49 and IAEA
requirements for Special Form Radioactive Material. It is authorized for
transport under IAEA Certificate of Competent Authority
No.USA/0566/S.
Fabrication, inspection and repair is controlled by USNRC Quality
Assurance Program No. 0102.
____________________________________________________________________________
| ITEM DESCRIPTION | PART NUMBER | PRICING |
| SPEC-300 Exposure Device Only | #190600-3 | $ Call |
| SPEC-300 Radiography System | #190600-3 -S | $ Call |
| System Includes: | SPEC-300 Exposure Device, 300 ci Capacity Co-60 |
| 35' Blue/Yellow Control with Control Adaptor | |
| 7' Blue Source Tube with Threaded Endpiece & Quick Disconnect | |
| 7' Blue Source Tube Extension | |
| 5 HVL 90 Degree Sideport Collimator |
|
|
|