|
|
 |
SOURCE
PRODUCTION & EQUIPMENT CO., INC.
|
|
DURABILITY
Constructed of titanium and , the SPEC-150 withstands
severe accidental impacts and is highly corrosion-resistant.
SAFETY
State-of-the-art safety features include the Automatic Securing Mechanism
(ASM) which cannot "trip" with the source assembly out, cannot
be defeated with vise-grips or other mechanical means, and has no
dangerous "source position" indicator. Innovative lock-step set
up design eliminates control hookup errors and source/drive cable
misconnects.
RELIABILITY
No moving parts are involved with the ASM design. The SPEC-150 system is
designed to significantly limit the ingress of dirt and foreign materials,
in all environments and working conditions, to protect against
malfunctions.
LOW MAINTENANCE
Absolutely no user disassembly for cleaning or maintenance is required.
The SPEC-150 is completely lubrication-free. Costly down-time due to
maintenance and returns to the manufacturer for repairs is virtually
eliminated.
OPTIONAL ANNUAL MAINTENANCE PROGRAM
The SPEC-150 maintenance program helps control costs and keep equipment at
peak performance. Dangerous equipment failures which may cause worker
injury and subject the employer to legal liability are minimized.
OTHER DESIGN FEATURES
Low center of gravity for "topple-proof" profile.
Low radiation level at the outlet nipple.
Permanent warning and caution labels.
Tie-down holes for safety harness.
 |
| CONSTRUCTION Fully welded titanium with some stainless steel fittings. |
SHIELD Depleted Uranium 37 lbs. (17 kg) with durable titanium S-tube. |
| WEIGHT Approximately 53 lbs. (24 kg) |
RATED CAPACITY 150 curies (125ci + 20%) 5,500 Gbq |
| DIMENSIONS Length: 14 1/2"(368mm) Width: 5 3/8" (137mm) Height: 5" 9/16 (141mm) |
SOURCES SPEC Model G-60 source assembly. The G-60 can be transported in the SPEC C-1 source exchanger. |
ASSOCIATED EQUIPMENT
The SPEC-150 is authorized for use with approved control assemblies,
flexible "yellow" guide tubes, low temperature guide tubes,
rigid stainless steel "J" tubes and straight tubes, collimators,
and the remote unsecuring mechanisms (RUM) that are designed, tested,
manufactured and inspected by SPEC. The maximum standard guide tube length
is 21 feet. Control assemblies for the SPEC 2-T may be converted for use
with the SPEC-150 by using an adapter. It is not necessary to purchase new
associated equipment. Replacement sources and associated equipment
manufactured by other companies may be submitted for approval for use with
the SPEC-150.
COMPLIANCE
The SPEC-150 System meets ANSI N432-1980 and U.S. Nuclear Regulatory
Commission 10 CFR Part 34.20 regulations. The Louisiana Radiation
Protection Division Registry No. is LA612D111S. U.S. DOT approval
Certificate of Compliance No. is USA/9263/B(U)-85. The Atomic Energy Control
Board (AECB) Canadian Endorsement No. is CDN/E170/-85 (REV.
0). The G-60
source meets ANSI N542 Classification 77C43515, U.S. DOT 10 CFR Part 49
and IAEA requirements for Special Form Radioactive Material. It is
authorized for transport under IAEA Certificate of Competent Authority
No.USA/0095/S. Fabrication, inspection and repair is controlled by USNRC
Quality Assurance Program No. 0102.
__________________________________________________________________________________
| ITEM DESCRIPTION | PART NUMBER | |
| SPEC-150 Exposure Device Only | #150000 | |
| SPEC-150 Radiography System | #150000-S | |
| System Includes: | SPEC-150 Exposure Device |
| 25' Control with SPEC-150 adaptor | |
| 7' Yellow Source Tube with Threaded Endpiece | |
| 7' Yellow Source Tube Extension | |
| STC Source Tube Coupling | |
| 5 HVL Mini Collimator |
SPEC-150 Components
& Miscellaneous Items
|
|
|